ACCESSORIES
CUSTOMIZE YOUR SET UP WITH THESE ACCESSORIES
ACCESSORIES
CUSTOMIZE YOUR SET UP WITH THESE ACCESSORIES

Topstage by Betz-Tools
QuickLok™ ™ Camera mounting platform for:
RIG, GPI PRO System, MK-V/Alien, Steadicam® IIIA / EFP models
for other systems on request.
- Absolute vibration-free
- Fine adjustment in two axis (self-retaining)
- Universal dovetailplate
- Integrated bubble level
Camera mounting
Quick, safe and easy mounting of the camera via the " QuickLok™ " fastener for the universal dovetailplate with safety lokpin.
The universal dovetail plate fits on any camera.
Fine adjustment for two axis
Fine adjustment for the camera, knobs on both sides. Fore/aft and side to side. The adjustment is self-retaining means no clamping is required.
Design
Built-in reference bubble level. Standard 15 mm rods for mounting accessories like remote controls are hard anodized.
Accessories
Light weight support for universal dovetail plate with 15mm rodsfor mounting remote lens motors etc. Mounting bracket for remote receiver.

Tiltplate by Betz-Tools
Easy to assemble in between post and camera mounting platform "Top Stage"
- For RIG, GPI PRO System, MK-V, Tiffen Steadicam®
- Old IIIA / EFP Models and other rigs with fourhole postmounting
- Absolute vibration-free
Mounting
Simply add the tiltplate with four screws between Steadicam® post and camera mounting platform "Stage".
For RIG - PRO - MK-V - Tiffen or any other Steadicam® system.
Adjustment
Set the proper length of sled and adjust the camera tilt angle. The post remains vertical and the dynamic balance is kept while panning the camera.
Design
Easy to set camera tilt angle via two clamps + - 20°.

Ted Churchill Monitorbracket by Betz-Tools
Ted Churchill Monitorbracket in shape of a quadrant, each monitor position in each Steadicam® configuration is possible.
- The monitor can be turned by just opening one screw
- The monitor can be adjusted on the Steadicam® in each position
- No detaining rods when the monitor is adjusted close to the Steadicam®


Tripodlokplate by Betz-Tools
For quick easy and safe camera swop from Steadicam® or shoulderpad
to a tripod.
- For RIG, GPI PRO, MK-V, Steadicam® IIIA / EFP / Tiffen dovetail plates
- Simply mount the Tripodlok with 3/8" or 1/4" screws on to a tripod snap plate
- QuickLok™ same as on our state of the art topstage
